HF Amplifers
50VDC Power Supply full kit
This power supply uses 1 Mean well LRS-350-48 power supplies to provide 7.5A. Front panel on the left has a 1A plug with 0-1A Panel meter for adjusting amplifier BIAS. The center has a digital volt meter and ammeter with a 7.5 Power Pole plug. The 1A side uses a rocker switch to enable or disable the 1A Panel meter.
Enclosure cooling is provided by 2 fans, one blowing in the other blowing out. An off the shelf regulator is mounted to PCB that drops the 50V down to around 12V. The voltage can be set to a quiet fan speed of your choice.
The AC plug on back cover also has a switch similar to a desk top computer.
The enclosure is a plastic Hammond enclosure, 1598J, available in black or gray.
If your running the Potentia 100 then only one Mean well supply is needed.
Multus SDR will Provide the internal PCB to mount the supplies, along with front and back end plates. The brackets, hardware and wiring for the power supply will provided.
Meanwell 48V power supply not included
Enclosure cooling is provided by 2 fans, one blowing in the other blowing out. An off the shelf regulator is mounted to PCB that drops the 50V down to around 12V. The voltage can be set to a quiet fan speed of your choice.
The AC plug on back cover also has a switch similar to a desk top computer.
The enclosure is a plastic Hammond enclosure, 1598J, available in black or gray.
If your running the Potentia 100 then only one Mean well supply is needed.
Multus SDR will Provide the internal PCB to mount the supplies, along with front and back end plates. The brackets, hardware and wiring for the power supply will provided.
Meanwell 48V power supply not included
50V 7.5A full kit power supply
50VDC Power Supply PCB Set
This power supply uses 1 Mean well LRS-350-48 power supplies to provide 7.5A. Front panel on the left has a 1A plug with 0-1A Panel meter for adjusting amplifier BIAS. The center has a digital volt meter and ammeter with a 7.5 Power Pole plug. The 1A side uses a rocker switch to enable or disable the 1A Panel meter.
Enclosure cooling is provided by 2 fans, one blowing in the other blowing out. An off the shelf regulator is mounted to PCB that drops the 50V down to around 12V. The voltage can be set to a quiet fan speed of your choice.
The AC plug on back cover also has a switch similar to a desk top computer.
The enclosure is a plastic Hammond enclosure, 1598J, available in black or gray.
If your running the Potentia 100 then only one Mean well supply is needed.
Multus SDR will Provide the internal PCB to mount the supplies, along with front and back end plates. A Digikey BOM link with be on the forum and links to other items like the meters too. The brackets and hardware for mounting the power supply to the PCB will provided.
Enclosure cooling is provided by 2 fans, one blowing in the other blowing out. An off the shelf regulator is mounted to PCB that drops the 50V down to around 12V. The voltage can be set to a quiet fan speed of your choice.
The AC plug on back cover also has a switch similar to a desk top computer.
The enclosure is a plastic Hammond enclosure, 1598J, available in black or gray.
If your running the Potentia 100 then only one Mean well supply is needed.
Multus SDR will Provide the internal PCB to mount the supplies, along with front and back end plates. A Digikey BOM link with be on the forum and links to other items like the meters too. The brackets and hardware for mounting the power supply to the PCB will provided.
50V 7.5A Power Supply PCB Set
Potentia 50 Basic Kit
The Potentia 50 is a 50W HF amplifier that runs off a 13.8VDC power supply. It uses a pair of IRFZ24N finals in a push pull configuration and draws about 10A. Covers 160M to 10M. At least 50W from 160-15M then tappers off to around 30W on 12/10M. Requires 3-5W input.
You will need to order the rest of the parts. For your convenience digikey shopping cart links are provided here. https://multussdr.groups.io/g/main/files/Potentia%2050/BOM
Total cost to complete build is around $230.00 depending on options selected.
Build instructions, Bill of materials and schematics are location on forum.
https://multussdr.groups.io/g/main/files/Potentia%2050
Kit includes the following:
Amplifier PCB
LPF PCB
Shield PCB
End panel PCBs
Front and back enclosure bezel with recess for heat sink
Heat sink with hardware
End panels screw set
Kits and assembly options could take up the 5 business day to fill order
You will need to order the rest of the parts. For your convenience digikey shopping cart links are provided here. https://multussdr.groups.io/g/main/files/Potentia%2050/BOM
Total cost to complete build is around $230.00 depending on options selected.
Build instructions, Bill of materials and schematics are location on forum.
https://multussdr.groups.io/g/main/files/Potentia%2050
Kit includes the following:
Amplifier PCB
LPF PCB
Shield PCB
End panel PCBs
Front and back enclosure bezel with recess for heat sink
Heat sink with hardware
End panels screw set
Kits and assembly options could take up the 5 business day to fill order
HF 50W Amplifier 160M - 10M
Potentia 50 full kit
Full kit to build the Potentia 50
The Potentia 50 is a 50W HF amplifier that runs off a 13.8VDC power supply. It uses a pair of IRFZ24N finals in a push pull configuration and draws about 10A. Covers 160M to 10M. At least 50W from 160-15M then tappers off to around 30W on 12/10M. Requires 3-5W input.
Options:
Full assembly and testing
Build instructions, Bill of materials and schematics are location on forum.
https://multussdr.groups.io/g/main/files/Potentia%2050
Kits and assembly options could take up the 5 business day to fill order
The Potentia 50 is a 50W HF amplifier that runs off a 13.8VDC power supply. It uses a pair of IRFZ24N finals in a push pull configuration and draws about 10A. Covers 160M to 10M. At least 50W from 160-15M then tappers off to around 30W on 12/10M. Requires 3-5W input.
Options:
Full assembly and testing
Build instructions, Bill of materials and schematics are location on forum.
https://multussdr.groups.io/g/main/files/Potentia%2050
Kits and assembly options could take up the 5 business day to fill order
HF 50W Amplifier 160M - 10M
- 1